This complete cooling system integrates all components into a single, ready-to-install unit for electrical cabinets. The system delivers 1800W of cooling at 35°C ambient with a high-efficiency scroll compressor and microchannel condenser. The integrated controller manages all cooling functions including temperature regulation, fan speed control, and alarm monitoring.
The IP54-rated steel enclosure provides protection against dust and water splashes. The system includes a built-in condensate evaporation tray, eliminating external drainage in most installations. Modbus RTU communication enables integration with building management and SCADA systems.
System Data
Power supply 400V AC / 3-phase
Rated current 5.2 A per phase
Refrigerant R454C / 920g
Airflow 650 m³/h
Dimensions 750×550×280 mm
Weight 52 kg
Complete Cooling System All components pre-assembled and tested. Includes compressor, condenser, evaporator, expansion valve, and controller in one unit. Ready for installation.
Integrated Controller Microprocessor-based with LCD display. Manages all cooling functions including temperature setpoint, fan speeds, alarms, and defrost cycles.
Condensate Evaporation Integrated tray uses condenser heat to evaporate collected moisture. Eliminates external drainage in most installations. Optional drain kit available.
BMS Integration Modbus RTU communication standard. Dry-contact alarm outputs. Compatible with major building management and SCADA platforms.
Scroll Compressor High-efficiency scroll type with 10-year design life. Internal thermal protection and vibration isolation. Crankcase heater for low-temperature startup.
Microchannel Condenser Aluminum microchannel coil with corrosion-resistant coating. EC fan with automatic speed control based on head pressure.
Electronic Expansion Valve Precision EEV with superheat control (4-7K). Optimizes system efficiency across varying load conditions. Reduces refrigerant charge requirements.
System Controller Microprocessor-based with LCD. Supports setpoint 5-50°C, differential 1-5°C. Alarm history stores last 50 events with timestamps.
Electrical & Cooling Cooling capacity (35°C) 1800 W ± 4%
Operating range -20°C ~ 55°C
Power supply 400V AC, 3-phase, 50Hz
Rated current 5.2 A (per phase)
Refrigerant / charge R454C / 920 g
Mechanical & Environmental Enclosure rating IP54 (IEC 60529)
Sound pressure (1m) 52 dB(A) @ 25°C
Evaporator airflow 650 m³/h
Condenser airflow 950 m³/h
Dimensions (H×W×D) 750 × 550 × 280 mm
Weight 52 kg
◆ Large Control Panels - Industrial automation panels with high heat loads requiring complete, integrated cooling solutions.
◆ Power Distribution - Main switchgear, MCCs, and power distribution centers in industrial and commercial facilities.
◆ Data Center Edge - Edge computing cabinets and network nodes requiring reliable, integrated thermal management.
◆ Critical Infrastructure - Transportation, utilities, and communications cabinets where system reliability is essential.
